48 / 228
46
SURFACING
The Black 1st fine Hi-Index pad is an evolutionary pad designed for use
with modern generators with little or no elliptical error. The lower stock
removal rates make it ideal for today’s soft Hi-Index lens material.
Hi-Index 1st Fine
MATERIAL: Silicon Carbide
THICKNESS: 0.28mm
SIZES:
All sizes
SHAPES:
P, Q, T
Superfine is a more aggressive addition to our family of 2nd fine pads with
increased stock removal rates. Consistent results ensure complete suitability
on the full range of CR-39 and Hi-Index lens material. The specially
formulated backing allows excellent conformity to the tool when placed
directly over the 1st fine pad.
“Superfine” Black 2nd Fine
MATERIAL: Silicon Carbide
THICKNESS: 0.26mm
SIZES:
All sizes
SHAPES:
P, Q, T
This pad has been designed especially for use with the latest generation of
processing equipment and plastic lens materials. The aluminum oxide
abrasive is unique and requires no breakdown of the abrasive to achieve a
high quality surface with minimum running times. For the best results, use a
direct water supply running to waste.
“Superfine” Pink 2nd Fine
The 180 grit is a well tried extremely aggressive pad and is ideally suited
for curve correction or removal of extreme elliptical error.
180 Grit Roughing
500/Roll
89-A2D2N $57.02
500/Roll
89-C1D2N $68.64
MATERIAL: Aluminum Oxide
THICKNESS: 0.13mm
SIZES:
All sizes
SHAPES:
P, T
MATERIAL: Aluminum Oxide
THICKNESS: 0.40mm
SIZES:
76mm, 89mm
SHAPES:
P, T
500/Roll
89-B1D2N $35.08
500/Roll
89-C2D2N $62.82
1-800-OptiSource
(678-4768)
A unique 1st fine pad, it gives consistent and high stock removal rates
throughout the fining cycle, yet achieves an excellent surface finish for the
2nd fine stage. The flexible backing ensures excellent conformity to the tool.
“Superfine” Black 1st Fine
MATERIAL: Silicone Carbide
THICKNESS: 0.27mm
SIZES:
All sizes
SHAPES:
P,Q,T
500/Roll
89-A1D2N
$49.14